POLAGARD AG – GARAGE FLOOR

 

USAGE: PROTECTIVE COATING

Category: Tags: , , Product ID: 2599

Description

PDF FORMS:  DATA SHEET,  SDS PART A, SDS PART B

Description

 

Outstanding Features

Recommended for

Coverage

 

Container sizes

 

Technology

Aliphatic Urethane

 

Preparation and Application

 

Spray Application

Recommended Thickness
2 coats yield 18 to 26 mils Dry Film Thickness (DFT)

Drying Time
Approximately 6 hours at 70°F (21°C) and 50% RH.

Cure Time
Approximately 72 hours at 70°F (21°C) and 50% RH.

Clean up
Clean tools and equipment with xylene or toluene solvent.

Limitations
Do not apply to frozen surfaces. Do not apply unless the temperature can be maintained above 40˚F for 8 hours. Surfaces must remain at least 5˚F above dewpoint during application and curing process. Application must be protected from precipitation for at least 4 hours. Do not contaminate product with moisture.

Maintenance
To remove graffiti, use environmentally approved cleaner to repair any damage to the coating system, call our Technical Department for assistance.

Storage
Store in a dry area and protect from direct sunlight and freezing. Keep container tightly sealed. Shelf life is 2 years from date of manufacture when stored in a factory sealed container between 40ºF (5ºC) and 90ºF (32ºC).

Disposal
Waste disposal must be in accordance with existing federal, state and local environmental control laws. Incineration is the preferred method of disposal.

Read the container label warning and Safety Data Sheet (SDS) for important health and safety information prior to the use of this product.

KEEP AWAY FROM CHILDREN AND PETS

For additional information, contact the Andek Technical Department

 

Technical Data
VOC 350 gms/liter
Removal of Graffiti Cleanability Level 1 ASTM D-7089-06
Flexibility at Low Temperature 180 deg. bend @ 20°F ASTM C-711
Elongation Unsupported
10% ASTM D-412
Tensile Strength 3,000 psi ASTM D-412
Flashpoint 105°F FTMS 141A(M4293)
Solids Content
68% (B.W.); 64% (B.V.) ASTM D-1044
Abrasion Resistance
27 lt/mil ASTM D-968-05
Shore ‘A’ Hardness
97 ASTM D-2240
Moisture Vapor Transmission 1.84 gms/M2/24 hrs (=0.16 perms) ASTM E-96
Weatherometer (5000 hrs) Pass ASTM G-23
Chemical Resistance Passes 200 Mek Double Rubs ASTM D-5402-06