ENCAPSALL SUPER

ENCAPSALL SUPER is a very tough, protective, urethane coating that is especially designed for industrial applications, including secondary containment areas, pipelines, valves and transfer pits. Fortified with iron oxide, ENCAPSALL SUPER cures to a rubber-like, waterproof, seamless membrane that possesses exceptional strength and elasticity.

OUTSTANDING FEATURES:

§ Can be used over metal, concrete, masonry, brick, rubber, asphalt, wood, tile and other surfaces

§ Produces a fully adhered, seamless, high density, waterproofing membrane

§ Resistant to attack from most industrial chemicals, gasoline, acids, alkalis, and detergents

§ Protects substrate against rust, corrosion and fungal attack

§ Will not deteriorate from exposure to UV radiation, bacteria or other environmental conditions

§ Easy to apply directly out of the container by brush, roller or airless spray

§ Remains flexible, tough and weatherproof at low temperatures

§ Highly penetrative and workable

§ Rapidly develops high tensile strength and elongation

§ Can easily be recoated

§ Warrantied for 10 years

All surfaces to be treated must be clean, dry and free of loose debris, oils, grease and any substance that would interfere with proper bond. A careful inspection of the surface should be made to detect any signs of damage or defects and all repairs should be completed before application of product. Porous surfaces and certain bituminous surfaces require a priming coat. Contact our Technical Department for details and primer recommendations. ENCAPSALL SUPER may be applied straight from the pail using brush, roller, or spray technique after 2 minutes of slow power stirring. ENCAPSALL SUPER is applied in 2 coats at a thickness of 16 wet mils per coat. Tools may be cleaned after use in any aromatic solvent.

safety equipment such as rubber gloves and chemical splash goggles be worn when handling this product. Inhalation should be avoided. Persons with known respiratory allergies should avoid exposure to this product. Avoid contact with skin and eyes. In case of contact, flush with large amounts of water for 15 minutes. Do not ingest. If inhaled, swallowed, or in case of eye contact, get immediate medical attention.

Black surfaces tend to absorb heat which is transmitted through the structure. To prevent heat buildup, Andek recommends an application of Silver Film over the ENCAPSALL SUPER. Keep ENCAPSALL SUPER pails away from direct sunlight. This product is a moisture-curing urethane and is packaged in specially sealed and air excluded drums. If damaged, air and moisture vapor may enter and cause premature curing. Care should be taken to avoid creating part full containers.

Damaged ENCAPSALL SUPER may be recoated after thorough cleaning and light sanding.

NOTICE: The information presented herein is based on tests and data that Andek Corporation believes to be reliable. It is intended for use by technically qualified personnel at their own discretion and risk. Since conditions of handling and use are beyond our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be construed as a license to operate or a recommendation to infringe any patent.