OZ CATALYST is a formulated chemical additive containing latent oxazolidone, a revolutionary product that adds tremendous performance and strength characteristics to urethane-based coatings.  When added to approved Andek products, it transforms them into denser, more highly crosslinked coatings that are more chemically resistant and capable of curing at any thickness.  Fortifying a coating with OZ Catalyst enables it to overcome even the toughest performance requirements for sealing, waterproofing, and protection.


Outstanding Features:





Before use, also read the product data sheet for the product that is being combined with OZ CATALYST. OZ CATALYST  may be used with Polaroof RAC, Roofd-x Super, Encapsall, or AIM #1. The use of OZ Catalyst with any other Andek product should only be attempted after thorough consultation with the Andek Technical Department. 

Open the container of OZ CATALYST and determine if it is liquid and free-flowing.  If it has been stored for any length of time below 50°F (10°C), it will have crystallized like honey.  If so, warm the container gently with an indirect  heat source at 100°F (38°C) until the OZ CATALYST ’s consistency is thoroughly liquid.  Pour an entire quart container of OZ CATALYST  into a 5 gallon pail of Andek coating and stir thoroughly for 3 minutes using an Andek ProPower Mixer or similar, effective mechanical device. After thorough homogeneity has been achieved, let the mixture sit for 2-3 minutes so that trapped air bubbles can rise up and escape from the coating mixture. Then apply the coating, following the instructions on the coating's container label.



OZ CATALYST will reduce the pot life of the coating to approximately 6 hours. Although OZ CATALYST will allow faster curing at low temperatures, do not apply any Andek coating to a frozen, damp or wet surface. OZ CATALYST should be stored between 50°F (10°C) and 90° (32°) in a dry area away from direct sunlight.



Read the container label warning and Material Safety Data Sheet (MSDS) for important health and safety information prior to the use of this product. 

Keep out of reach of children and pets.

For additional information, contact the Andek Technical Department.


Technical Data:



Notice: The information presented herein is based on tests and data that Andek Corporation believes to be reliable. It is intended for use by technically qualified personnel at their own discretion and risk. Since conditions of handling and use are beyond our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be construed as a license to operate or a recommendation to infringe any patent.