COCOON WEBBING AGENT is a resin solution that is a reinforcing additive. COCOON WEBBING AGENT, when mixed with any Cocoon coating, is used to form a bridge over openings. A properly sprayed coat of COCOON WEBBING AGENT will result in a fine, dry, cobweb-like filament which will not break of its own weight. COCOON WEBBING AGENT forms part of the Cocoon range of products that have diverse uses for architectural and industrial coatings applications in waterproofing and air sealing. Cocoon has been in continual use for over 50 years.


Outstanding Features:





Read this entire data sheet before continuing.  All surfaces must be dry, free of dirt, loose debris, oil, grease, or any substance that could interfere with adhesion.  Additionally,all surfaces should be modified in a manner to make them as smooth as possible by removing sharp projections and filling gaps and voids.  A minimum surface profile of ½mm should be maintained for maximum adhesion.  After proper masking, prime the entire surface to be coated with Vinyl Bond B, directly from the can, by spray or roller, and allow the primer to dry.  When dry, the surface should be glossy and a light blue color.  Webbing solution is made by mixing 1 part of Webbing Agent with 3 parts of Cocoon (by volume) and agitating with an air-driven mixer until it has become a milky white solution (at least 3 minutes).  Apply Cocoon webbing coat with the correct spray equipment to an opaque, homogenous covering around pipes, ducts, etc.  This membrane will support all of the following coats of Cocoon.  The first application of Cocoon over the webbing coat should be a light, rapid pass to provide the webs some strength and prevent them from breaking when the Cocoon coating is applied



Proper ventilation must be provided during application for effective drying of the coating, and all applicators must wear suitable respirators.  All webbing work must be protected from inclement weather during application.  Application should cease upon commencement of precipitation and be thoroughly inspected prior to re-commencement and force-dried, if necessary, so as to prevent entrapment of water.



If webs are damaged, re-webbing may commence provided that the surface is uncontaminated; otherwise, clean and remove all contaminated material and re-apply.



Read the container label warning and Material Safety Data Sheet (MSDS) for important health and safety information prior to the use of this product. 

Keep out of reach of children and pets.

For additional information, contact the Andek Technical Department.




Notice: The information presented herein is based on tests and data that Andek Corporation believes to be reliable. It is intended for use by technically qualified personnel at their own discretion and risk. Since conditions of handeling and use are beyond our control, we make no warranties, express or implied, and assuming no liability in connection with any use of this information. Nothing herein is to be construed as a license to operate or a recommendation to infringe any patent.