COCOON 111 is a strippable coating used for long-term storage of materials and equipment otherwise susceptible to corrosion.  With this product, equipment may be stored outdoors, yet be returned back into production within hours.


Outstanding Features:





All surfaces must be dry, free of dirt, loose debris, oils, grease, or any substance that could contaminate or weaken the Cocoon.  Close all penetrations and openings with a Cocoon Webbing coat. Webbing solution is made by mixing 1 part Webbing Agent to 3 parts Cocoon 111 and agitating with an air driven mixer until it becomes a thoroughly mixed, milky white solution.  Spray out the webs until a homogenous covering has been achieved. The first application of Cocoon 111 over the webbing coat should be a light rapid pass to pro-vide the webs some strength and prevent them from breaking when the Cocoon coating is applied.  For more information concerning the Cocoon Webbing coat, please refer to the Cocoon Webbing Agent data sheet.  If vapor corrosion inhibitor or silica gel dessicant is to be used, this should be installed immediately prior to the Cocoon sealing process to conserve as much activity as possible.  Mix ½ gallon of Cocoon pigment into a 5 gallon pail of Cocoon 111 and mix thoroughly until all of the color is thoroughly dispersed.  Spray apply the pigmented Cocoon 111 using overlapping passes of an air atomized spray gun until 25 dry mils thickness is obtained. Properly applied, the Cocoon coating should be free of any voids or pinholes. Voids and pinholes must be repaired and re-sprayed.  For recommendations regarding equipment, contact our Technical Department.



Proper ventilation must be provided during application for effective drying of the coating, and all applicators must wear suitable respirators.



Damaged areas may be repaired by cleaning the surrounding surface and application of Cocoon 111 as described in the Application section.



Read the container label warning and Material Safety Data Sheet (MSDS) for important health and safety information prior to the use of this product. 

Keep out of reach of children and pets.

For additional information, contact the Andek Technical Department.




Notice: The information presented herein is based on tests and data that Andek Corporation believes to be reliable. It is intended for use by technically qualified personnel at their own discretion and risk. Since conditions of handeling and use are beyond our control, we make no warranties, express or implied, and assuming no liability in connection with any use of this information. Nothing herein is to be construed as a license to operate or a recommendation to infringe any patent.